1550-1620 MHz / 200 Watts
UAV Navigation High Power Amplifier(1550 – 1620 MHz / 200 Watts) Model:UNPA-1550-70-55-53
Classification:
Key words:
Complete Equipment Series
Active Module Series
Passive Device Series
Antenna Series
Product Description
OVERVIEW
The UNPA-1550-70-55-53 is a 200W rf power amplifier. It amplify satellite navigation signals: GPS L1,L2, L4,L5; BDS; GALILEO L1 L5; GLONASS L1,L5.It is LDMOS design ensure high efficiency and ultra broadband.
DESCRIPTION
- Continuous wave output suitable for CW ,FM or AM modulation
- ALC control function of output power or working current
- Over-high VSWR to avoid or reduce the damage from any mismatch
- Protection over short or open of output port
- Pout and Gain of Temperature compensation
- Over-high temperature protection, Shutdown over than 75℃, auto-restart less than 55℃
- Fully equipped with monitoring functions, providing output power, reflected power, temperature detection analog interface (0-5V), standing wave alarm and temperature alarm indication interface (TTL level, high, low level can be customized), RF switch control interface (TTL level, suspended, high, low level status can be customized)
- It is also equipped with an RS485 data communication interface that can read the working status of the module, such as output power, reflected power, temperature, standing wave alarm, temperature alarm, etc. It can also control the RF on.
ELECTRICAL SPECIFICATIONS
|
No |
Item |
Description |
|
|
1 |
Frequency Range |
1550-1620MHz(or Customized) |
|
|
2 |
Output power Pmax |
53dBm±0.5dB |
|
|
3 |
Normal Input Power |
0dBm |
|
|
4 |
Max Undamaged Pin |
10dBm |
|
|
5 |
Gain |
55dB±1.5dB |
|
|
6 |
Gain Adjust Range |
25dB; 1dB Step; |
|
|
7 |
Gain Adjust Error |
±1.5dB |
|
|
8 |
RF Port VSWR |
≤1.5 |
|
|
9 |
Working Voltage |
28VDC±1V |
|
|
10 |
Maximum Current |
<18A@ Pmax |
|
|
11 |
RF In Port |
SMA–Female 50 Ohms |
|
|
12 |
RF Out Port |
N-K 50 Ohms |
|
|
13 |
Power Supply Port |
DSUB 2W2-Male (or Customized) |
|
|
14 |
Monitor Port |
DB9 Female(or Customized) |
|
|
15 |
Size |
155*151*26mm (Exclusive Connector) |
|
|
15 |
Working Temperature |
-25-+65℃ |
|
|
16 |
Protection Function |
Shutdown over than 75℃ Auto-restart less than 55℃ |
|
|
Shutdown when High-VSWR(3.0), Auto-restart check after about 30s |
|||
|
17 |
Monitor Function |
Analog |
The definition is detailed in the following chapters |
|
Digital |
RS485(Baud rate:9600bps,19200bps Customized) | ||
MONITOR PORT DEFINITION
|
DB9K |
||
|
Pin No |
Mark |
Description(Reference, Can be customized also) |
|
PIN1 |
Rf-Sw |
TTL 0V or hanging: PA on; 5V: PA off(or Customized) |
|
PIN2 |
TA |
TTL Alarm(5V) over High-Temperature and PA shutdown |
|
PIN3 |
VA |
TTL Alarm(5V) over High-VSWR and PA shutdown |
|
PIN4 |
RPW |
Reversed RF Power Indicator ANALOG 0 to 5V |
|
PIN5 |
FPW |
Forward RF Power Indicator ANALOG 0 to 5V |
|
PIN6 |
TMP |
ANALOG 0 to 5V 0 to 100ºC 0.5V +Tc *( 0.01V/℃) |
|
PIN7 |
RS485A |
RS485A PIN |
|
PIN8 |
RS485B |
RS485B PIN |
|
PIN9 |
GND |
GND |
Previous
Previous
Related Products
Online consultation